Skip to main content

Adding Byproducts to a Recipe Stage

Producer steps in Encompass for adding byproducts (spent grain, heads/tails) to a recipe stage in Recipe Management. Byproduct must be a product with inventory tracking on. Requires v25.01+.

B
Written by Bailey Naas-Thornton

Minimum Version Required: 25.01

Pre-Conditions

Make sure that the byproduct that the Recipe Stage is going to produce, exists on the Products table and is assigned to a Product Type where Track Inventory = TRUE.

Steps

Adding Byproducts to a Recipe Stage
​
​

  1. Navigate to the Recipe Management dashboard.
    ​
    ​

  2. Use the Brand, Product or Recipe Version filter to narrow the search results (at least one filter is required to search).
    ​
    ​

  3. Click the Search button.
    ​
    ​

  4. Recipe Versions that match the filter selection will appear under the search filters. To edit a Recipe Version, click on the Recipe Version where the Byproduct will be added to.
    ​
    ​

  5. Click the Byproducts Management button on the Stage that will produce a byproduct.
    ​
    ​

  6. Click the Add Byproduct button.
    ​
    ​

  7. In the Product drop-down, select the Product that will be created during this stage. If the Product does not already exist, go to the Products table and create a new Product.
    ​
    ​

  8. Enter the Quantity of the Product that the stage will create, and select the Unit of Measure for the Product.
    ​
    ​

  9. Continue adding additional Byproducts by clicking the Add Byproduct button as needed.
    ​
    ​

  10. Click Save when finished.

Fields And Definitions

  • Byproduct - an additional product that is produced at the end of a Recipe Stage (spent grain, second runnings, heads and tails from distillation, etc.)

  • Quantity -The amount of Byproduct produced in the selected Recipe Stage corresponding to the relevant Unit of Measure

  • UoM (Unit of Measure) - The unit by which the output goods will be measured.

Did this answer your question?